Cartesio

Bathtubs free-standing

– design Benedini Associati Benedini Associati,  2009

Cartesio

Bathtubs free-standing

– design Benedini Associati Benedini Associati,  2009

Rationality and versatility merge in Cartesio, a rectangular freestanding bathtub in white Cristalplant®. The edges of the tub can be produced in any thickness, thus allowing it to be adapted to any situation. Taps are available to be fitted on the bathtub, wall or floor mounted.

Available models

Rectangular bathtub in white Cristalplant® with overflow hole. Tap units may be placed on the edge of the bathtub, on the wall or on the floor. Water supply from the inside of  the bathtub is possible too, via hole provided with ferrule in gloss stainless steel. Models for freestanding, corner, niche or built-in installations. The bathtub internal measures are 166 x 66 cm (65" 3/8 x 26") and its edges have a maximum width of 27 cm (10" 5/8). However, other measurements are also available (minimum width: 5 cm - 2"). The minimum width to install the tapware on the edge of the tub or an internal water supply is 15 cm (5" 7/8). In addition to the shown configurations, several variations are possible depending on edge width, presence of vertical finish panels or storage compartments. In your order please specify: the accessorized side, the type of tap holes, the position of the tapware, the presence of an interior water supply. It is mandatory to use waste trap .MET0477 or .MET0477C (.MET0434 or .MET0477C for bathtubs on display). For an easier installation of the bathtubs we recommend to use the template for the positioning of the waste trap AKITPZVAS.

Height 55 cm 21" 5/8 inches
Width 176 cm 69" 1/4 inches
Length cm inches
Diameter cm inches
Weight 140 kg 309 lbs
Packaging cm 35" 3/8 x 74" 6/8 x 26" 6/8 inches
Gross Weight 200 kg 441 lbs
White

White

White/dark grey

White/dark grey

White/light grey

White/light grey

File 2D .dwg 0.26 MB
File 2D .dxf 1.05 MB
Assembly Instructions .pdf 0.54 MB
File 3D .zip 0.38 MB
File 3D .zip 3.74 MB
Spec Sheet .pdf

Rectangular bathtub in white Cristalplant® with overflow hole. Tap units may be placed on the edge of the bathtub, on the wall or on the floor. Water supply from the inside of the bathtub is possible too, via hole provided with ferrule in gloss stainless steel. Models for freestanding, corner, niche or built-in installations. The bathtub internal measures are 166 x 66 cm (65" 3/8 x 26") and its edges have a maximum width of 27 cm (10" 5/8). However, other measurements are also available (minimum width: 5 cm - 2"). The minimum width to install the tapware on the edge of the tub or an internal water supply is 15 cm (5" 7/8). In addition to the shown configurations, several variations are possible depending on edge width, presence of vertical finish panels or storage compartments. In your order please specify: the accessorized side, the type of tap holes, the position of the tapware, the presence of an interior water supply. It is mandatory to use waste trap .MET0477 or .MET0477C (.MET0434 or .MET0477C for bathtubs on display). For an easier installation of the bathtubs we recommend to use the template for the positioning of the waste trap AKITPZVAS.

Height 55 cm 21" 5/8 inches
Width 176 cm 69" 1/4 inches
Length cm inches
Diameter cm inches
Weight 230 kg 507 lbs
Packaging cm 43" 2/8 x 74" 6/8 x 26" 6/8 inches
Gross Weight 290 kg 639 lbs
White

White

File 2D .dwg 0.27 MB
File 2D .dxf 1.06 MB
Assembly Instructions .pdf 0.72 MB
File 2D .dwg 0.25 MB
File 2D .dxf 1.06 MB
File 3D .zip 0.40 MB
File 3D .zip 3.78 MB
Spec Sheet .pdf
 

References featuring Cartesio

Residential NEO Bankside
Residential NEO Bankside